ISO 5753-1 6200-2RS Series Sealed Ball Bearings Specification
What ISO 5753-1 fixes, what it deliberately leaves to another document, its equivalents, and the dimensional table.
ISO 5753-1 tabulates the radial internal clearance of unmounted radial bearings by bore range and clearance group — C2, CN (normal, and usually left out of the designation), C3, C4 and C5. The clearance is measured before mounting; the interference fits used on the shaft and in the housing, plus any temperature difference across the bearing, consume part of it in service.
Standard
ISO 5753-1
Covers
Radial internal clearance
Does not fix
It is not a tolerance class and it is not a fit table: how much of the listed clearance survives mounting depends on the shaft and housing fits chosen to ISO 286, which the standard does not prescribe.
Equivalents
GB/T 4604.1 is the Chinese equivalent; the values for tapered-bore and for non-ball types are given in the standard's own separate tables.
Product
6200-2RS Series Sealed Ball Bearings
Governing standards
ISO 15 / DIN 625-1 / GB/T 276
Equivalence between the ISO, DIN and GB/T documents is dimensional: a bearing made to either mounts in the same seat. It is not an equivalence of load rating, tolerance class or internal clearance, each of which is fixed by a separate standard and declared separately.
6200-2RS Series Sealed Ball Bearings manufactured to ISO 5753-1 are tabulated below. The standard covers radial internal clearance — and reading it as though it covered anything else is the most common mistake made with a bearing standard, so the boundary of its scope is set out first.
ISO 5753-1 — Scope
ISO 5753-1 tabulates the radial internal clearance of unmounted radial bearings by bore range and clearance group — C2, CN (normal, and usually left out of the designation), C3, C4 and C5. The clearance is measured before mounting; the interference fits used on the shaft and in the housing, plus any temperature difference across the bearing, consume part of it in service.
What ISO 5753-1 Does Not Fix
It is not a tolerance class and it is not a fit table: how much of the listed clearance survives mounting depends on the shaft and housing fits chosen to ISO 286, which the standard does not prescribe.
This division of labour is the thing to carry away from any bearing standard. A boundary dimension standard makes bearings interchangeable; it does not make them equivalent. Two bearings of the same designation from different makers mount in the same seat and are not required to have the same load rating, the same internal design, the same cage or the same speed limit.
Dimensions Supplied to ISO 5753-1
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Seal type
Operating temperature range (u00b0C)
Basic dynamic load rating Cr (kN)
Basic static load rating C0r (kN)
6200-2RS
10
30
9
0.6
Contact rubber seal, both sides
-30 to +110
5.07
2.36
6201-2RS
12
32
10
0.6
Contact rubber seal, both sides
-30 to +110
6.89
3.10
6202-2RS
15
35
11
0.6
Contact rubber seal, both sides
-30 to +110
7.80
3.75
6203-2RS
17
40
12
0.6
Contact rubber seal, both sides
-30 to +110
9.95
4.75
6204-2RS
20
47
14
1
Contact rubber seal, both sides
-30 to +110
13.5
6.55
6205-2RS
25
52
15
1
Contact rubber seal, both sides
-30 to +110
14.8
7.80
6206-2RS
30
62
16
1
Contact rubber seal, both sides
-30 to +110
20.3
11.2
6207-2RS
35
72
17
1.1
Contact rubber seal, both sides
-30 to +110
25.5
15.3
6208-2RS
40
80
18
1.1
Contact rubber seal, both sides
-30 to +110
30.7
19.0
6209-2RS
45
85
19
1.1
Contact rubber seal, both sides
-30 to +110
33.2
21.6
6210-2RS
50
90
20
1.1
Contact rubber seal, both sides
-30 to +110
35.1
23.2
6211-2RS
55
100
21
1.5
Contact rubber seal, both sides
-30 to +110
43.6
29.0
6212-2RS
60
110
22
1.5
Contact rubber seal, both sides
-30 to +110
47.5
32.5
6213-2RS
65
120
23
1.5
Contact rubber seal, both sides
-30 to +110
55.9
40.5
6214-2RS
70
125
24
1.5
Contact rubber seal, both sides
-30 to +110
61.8
45.0
6215-2RS
75
130
25
1.5
Contact rubber seal, both sides
-30 to +110
66.3
49.0
6216-2RS
80
140
26
2
Contact rubber seal, both sides
-30 to +110
72.8
55.0
6217-2RS
85
150
28
2
Contact rubber seal, both sides
-30 to +110
83.2
64.0
6218-2RS
90
160
30
2
Contact rubber seal, both sides
-30 to +110
95.6
73.5
6219-2RS
95
170
32
2.1
Contact rubber seal, both sides
-30 to +110
108
83.0
6220-2RS
100
180
34
2.1
Contact rubber seal, both sides
-30 to +110
124
93.0
National Equivalents
GB/T 4604.1 is the Chinese equivalent; the values for tapered-bore and for non-ball types are given in the standard's own separate tables.
This product is supplied against ISO 15 / DIN 625-1 / GB/T 276, which names the documents it is made to.
Catalog Products Governed by ISO 5753-1
ISO 5753-1 governs more than this one series. In this catalog it applies to:
Other ways to specify the 6200-2RS Series Sealed Ball Bearings
The same part is also governed by GB/T 276 and ISO 281, and where two standards cover one dimension they agree — the numbers are the same, the document is not.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Our facility
Where these dimensions are actually made
Ring forging, heat treatment, raceway grinding and superfinishing all happen under one roof, so a bore tolerance and a clearance group are set by processes we control and can evidence, not by whichever supplier had stock.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / DIN 625-1 / GB/T 276)
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Seal type
Operating temperature range (u00b0C)
Basic dynamic load rating Cr (kN)
Basic static load rating C0r (kN)
6200-2RS
10
30
9
0.6
Contact rubber seal, both sides
-30 to +110
5.07
2.36
6201-2RS
12
32
10
0.6
Contact rubber seal, both sides
-30 to +110
6.89
3.10
6202-2RS
15
35
11
0.6
Contact rubber seal, both sides
-30 to +110
7.80
3.75
6203-2RS
17
40
12
0.6
Contact rubber seal, both sides
-30 to +110
9.95
4.75
6204-2RS
20
47
14
1
Contact rubber seal, both sides
-30 to +110
13.5
6.55
6205-2RS
25
52
15
1
Contact rubber seal, both sides
-30 to +110
14.8
7.80
6206-2RS
30
62
16
1
Contact rubber seal, both sides
-30 to +110
20.3
11.2
6207-2RS
35
72
17
1.1
Contact rubber seal, both sides
-30 to +110
25.5
15.3
6208-2RS
40
80
18
1.1
Contact rubber seal, both sides
-30 to +110
30.7
19.0
6209-2RS
45
85
19
1.1
Contact rubber seal, both sides
-30 to +110
33.2
21.6
6210-2RS
50
90
20
1.1
Contact rubber seal, both sides
-30 to +110
35.1
23.2
6211-2RS
55
100
21
1.5
Contact rubber seal, both sides
-30 to +110
43.6
29.0
6212-2RS
60
110
22
1.5
Contact rubber seal, both sides
-30 to +110
47.5
32.5
6213-2RS
65
120
23
1.5
Contact rubber seal, both sides
-30 to +110
55.9
40.5
6214-2RS
70
125
24
1.5
Contact rubber seal, both sides
-30 to +110
61.8
45.0
6215-2RS
75
130
25
1.5
Contact rubber seal, both sides
-30 to +110
66.3
49.0
6216-2RS
80
140
26
2
Contact rubber seal, both sides
-30 to +110
72.8
55.0
6217-2RS
85
150
28
2
Contact rubber seal, both sides
-30 to +110
83.2
64.0
6218-2RS
90
160
30
2
Contact rubber seal, both sides
-30 to +110
95.6
73.5
6219-2RS
95
170
32
2.1
Contact rubber seal, both sides
-30 to +110
108
83.0
6220-2RS
100
180
34
2.1
Contact rubber seal, both sides
-30 to +110
124
93.0
Video: ISO 5753-1 6200-2RS Series Sealed Ball Bearings Specification
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
What does ISO 5753-1 specify?
ISO 5753-1 tabulates the radial internal clearance of unmounted radial bearings by bore range and clearance group — C2, CN (normal, and usually left out of the designation), C3, C4 and C5. The clearance is measured before mounting; the interference fits used on the shaft and in the housing, plus any temperature difference across the bearing, consume part of it in service.
What does ISO 5753-1 not cover?
It is not a tolerance class and it is not a fit table: how much of the listed clearance survives mounting depends on the shaft and housing fits chosen to ISO 286, which the standard does not prescribe.
What is the equivalent of ISO 5753-1?
GB/T 4604.1 is the Chinese equivalent; the values for tapered-bore and for non-ball types are given in the standard's own separate tables.
Does ISO 5753-1 mean two bearings are interchangeable?
Dimensionally, yes — that is what a boundary dimension standard is for, and a bearing of the same designation from any maker mounts in the same shaft and housing seat. Functionally, not necessarily: the load rating, the internal design, the cage, the clearance group and the speed limit are decided by the manufacturer and by other standards, and two bearings with the same number are not required to match on any of them.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
