Self-Aligning Ball Bearings · ISO 15 / GB/T 281 / DIN 630
ISO 15 2200K Series Tapered Bore Self-Aligning Ball Bearings Specification
What ISO 15 fixes, what it deliberately leaves to another document, its equivalents, and the dimensional table.
ISO 15 fixes the boundary dimensions of metric radial rolling bearings: the bore d, the outside diameter D, the width B and the limiting corner radius r, arranged in diameter and width series so that a bore of 20 mm exists in several standard envelopes (6004, 6204, 6304, 6404). It is the reason a 6204 from any manufacturer drops into the same housing.
Standard
ISO 15
Covers
Boundary dimensions of radial rolling bearings
Does not fix
It says nothing about how much load the bearing carries, how fast it may run, how accurately it is made or how much clearance it has. Load ratings are calculated to ISO 281, running accuracy is ISO 492 and radial internal clearance is ISO 5753-1.
Equivalents
DIN 616 restates the dimension plan nationally, with the individual bearing types in DIN 625, DIN 628, DIN 630, DIN 635 and DIN 5412; GB/T 273.3 carries the same plan in China.
Product
2200K Series Tapered Bore Self-Aligning Ball Bearings
Governing standards
ISO 15 / GB/T 281 / DIN 630
Equivalence between the ISO, DIN and GB/T documents is dimensional: a bearing made to either mounts in the same seat. It is not an equivalence of load rating, tolerance class or internal clearance, each of which is fixed by a separate standard and declared separately.
ISO 15 covers boundary dimensions of radial rolling bearings. This page sets out what the standard fixes for 2200k series tapered bore self-aligning ball bearings, what it deliberately leaves to other documents, its national equivalents, and the dimensional table supplied against it.
ISO 15 — Scope
ISO 15 fixes the boundary dimensions of metric radial rolling bearings: the bore d, the outside diameter D, the width B and the limiting corner radius r, arranged in diameter and width series so that a bore of 20 mm exists in several standard envelopes (6004, 6204, 6304, 6404). It is the reason a 6204 from any manufacturer drops into the same housing.
What ISO 15 Does Not Fix
It says nothing about how much load the bearing carries, how fast it may run, how accurately it is made or how much clearance it has. Load ratings are calculated to ISO 281, running accuracy is ISO 492 and radial internal clearance is ISO 5753-1.
This division of labour is the thing to carry away from any bearing standard. A boundary dimension standard makes bearings interchangeable; it does not make them equivalent. Two bearings of the same designation from different makers mount in the same seat and are not required to have the same load rating, the same internal design, the same cage or the same speed limit.
Dimensions Supplied to ISO 15
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Bore taper
Adapter sleeve
Permissible misalignment (deg)
2205K
25
52
18
1
1:12
H305
2.5
2206K
30
62
20
1
1:12
H306
2.5
2207K
35
72
23
1.1
1:12
H307
2.5
2208K
40
80
23
1.1
1:12
H308
2.5
2209K
45
85
23
1.1
1:12
H309
2.5
2210K
50
90
23
1.1
1:12
H310
2.5
2211K
55
100
25
1.5
1:12
H311
2.5
2212K
60
110
28
1.5
1:12
H312
2.5
2213K
65
120
31
1.5
1:12
H313
2.5
2214K
70
125
31
1.5
1:12
H314
2.5
2215K
75
130
31
1.5
1:12
H315
2.5
2216K
80
140
33
2
1:12
H316
2.5
2217K
85
150
36
2
1:12
H317
2.5
2218K
90
160
40
2
1:12
H318
2.5
2219K
95
170
43
2.1
1:12
H319
2.5
2220K
100
180
46
2.1
1:12
H320
2.5
National Equivalents
DIN 616 restates the dimension plan nationally, with the individual bearing types in DIN 625, DIN 628, DIN 630, DIN 635 and DIN 5412; GB/T 273.3 carries the same plan in China.
This product is supplied against ISO 15 / GB/T 281 / DIN 630, which names the documents it is made to.
Catalog Products Governed by ISO 15
ISO 15 governs more than this one series. In this catalog it applies to:
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Our facility
Where these dimensions are actually made
Ring forging, heat treatment, raceway grinding and superfinishing all happen under one roof, so a bore tolerance and a clearance group are set by processes we control and can evidence, not by whichever supplier had stock.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / GB/T 281 / DIN 630)
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Bore taper
Adapter sleeve
Permissible misalignment (deg)
2205K
25
52
18
1
1:12
H305
2.5
2206K
30
62
20
1
1:12
H306
2.5
2207K
35
72
23
1.1
1:12
H307
2.5
2208K
40
80
23
1.1
1:12
H308
2.5
2209K
45
85
23
1.1
1:12
H309
2.5
2210K
50
90
23
1.1
1:12
H310
2.5
2211K
55
100
25
1.5
1:12
H311
2.5
2212K
60
110
28
1.5
1:12
H312
2.5
2213K
65
120
31
1.5
1:12
H313
2.5
2214K
70
125
31
1.5
1:12
H314
2.5
2215K
75
130
31
1.5
1:12
H315
2.5
2216K
80
140
33
2
1:12
H316
2.5
2217K
85
150
36
2
1:12
H317
2.5
2218K
90
160
40
2
1:12
H318
2.5
2219K
95
170
43
2.1
1:12
H319
2.5
2220K
100
180
46
2.1
1:12
H320
2.5
Video: ISO 15 2200K Series Tapered Bore Self-Aligning Ball Bearings Specification
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
Does ISO 15 fix the load rating?
No. ISO 15 does not set load ratings. Basic dynamic load ratings are calculated to the method of ISO 281 and are declared by the manufacturer; the static rating follows ISO 76.
Which edition of ISO 15 does this table follow?
The table reproduces the dimensions we supply 2200k series tapered bore self-aligning ball bearings to. We do not publish an edition year against it, so where the edition is contractually significant, cite the edition you require on the enquiry and we will confirm it against the table before quoting.
Can I cite the GB/T number instead of the ISO one?
For the boundary dimensions, yes — the GB/T standards restate the ISO dimension plan and a part made to either mounts in the same seat. The safest drawing note gives both, because it stays legible if the supply moves between a Chinese, a European and an international manufacturer.
What does ISO 15 specify?
ISO 15 fixes the boundary dimensions of metric radial rolling bearings: the bore d, the outside diameter D, the width B and the limiting corner radius r, arranged in diameter and width series so that a bore of 20 mm exists in several standard envelopes (6004, 6204, 6304, 6404). It is the reason a 6204 from any manufacturer drops into the same housing.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
