Angular Contact Ball Bearings · ISO 15 / DIN 628-1 / GB/T 292
DIN 628 7000AC Series Angular Contact Ball Bearings Specification
What DIN 628 fixes, what it deliberately leaves to another document, its equivalents, and the dimensional table.
DIN 628 is the German standard for angular contact ball bearings, restating the ISO 15 envelope for the type: part 1 the single row 7000 series, part 3 the double row 3200 and 3300 series, and part 4 the four-point contact QJ bearings.
Standard
DIN 628
Covers
Angular contact ball bearings
Does not fix
It fixes the envelope, not the contact angle variants a manufacturer offers, the preload class of a matched set, or the load rating — the first is a design choice, the second is agreed on the order and the third is ISO 281.
Equivalents
ISO 15 internationally; GB/T 292 for single row and GB/T 296 for double row in China.
Product
7000AC Series Angular Contact Ball Bearings
Governing standards
ISO 15 / DIN 628-1 / GB/T 292
Equivalence between the ISO, DIN and GB/T documents is dimensional: a bearing made to either mounts in the same seat. It is not an equivalence of load rating, tolerance class or internal clearance, each of which is fixed by a separate standard and declared separately.
For 7000ac series angular contact ball bearings, DIN 628 is one of the controlling documents. The sections below describe its scope, the properties it does NOT decide and which standard does decide them, the equivalent designations, and the full size range.
DIN 628 — Scope
DIN 628 is the German standard for angular contact ball bearings, restating the ISO 15 envelope for the type: part 1 the single row 7000 series, part 3 the double row 3200 and 3300 series, and part 4 the four-point contact QJ bearings.
What DIN 628 Does Not Fix
It fixes the envelope, not the contact angle variants a manufacturer offers, the preload class of a matched set, or the load rating — the first is a design choice, the second is agreed on the order and the third is ISO 281.
This division of labour is the thing to carry away from any bearing standard. A boundary dimension standard makes bearings interchangeable; it does not make them equivalent. Two bearings of the same designation from different makers mount in the same seat and are not required to have the same load rating, the same internal design, the same cage or the same speed limit.
Dimensions Supplied to DIN 628
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Contact angle a (deg)
7000AC
10
26
8
0.3
25
7001AC
12
28
8
0.3
25
7002AC
15
32
9
0.3
25
7003AC
17
35
10
0.3
25
7004AC
20
42
12
0.6
25
7005AC
25
47
12
0.6
25
7006AC
30
55
13
1
25
7007AC
35
62
14
1
25
7008AC
40
68
15
1
25
7009AC
45
75
16
1
25
7010AC
50
80
16
1
25
7011AC
55
90
18
1.1
25
7012AC
60
95
18
1.1
25
7013AC
65
100
18
1.1
25
7014AC
70
110
20
1.1
25
7015AC
75
115
20
1.1
25
7016AC
80
125
22
1.1
25
7017AC
85
130
22
1.1
25
7018AC
90
140
24
1.5
25
7019AC
95
145
24
1.5
25
7020AC
100
150
24
1.5
25
National Equivalents
ISO 15 internationally; GB/T 292 for single row and GB/T 296 for double row in China.
This product is supplied against ISO 15 / DIN 628-1 / GB/T 292, which names the documents it is made to.
Catalog Products Governed by DIN 628
DIN 628 governs more than this one series. In this catalog it applies to:
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Our facility
The numbers come off our own machines
Every ring is gauged for bore and outside diameter, every assembly for radial internal clearance to ISO 5753-1, and every finished bearing for vibration. That is why the values on this page are quotable rather than indicative.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / DIN 628-1 / GB/T 292)
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Contact angle a (deg)
7000AC
10
26
8
0.3
25
7001AC
12
28
8
0.3
25
7002AC
15
32
9
0.3
25
7003AC
17
35
10
0.3
25
7004AC
20
42
12
0.6
25
7005AC
25
47
12
0.6
25
7006AC
30
55
13
1
25
7007AC
35
62
14
1
25
7008AC
40
68
15
1
25
7009AC
45
75
16
1
25
7010AC
50
80
16
1
25
7011AC
55
90
18
1.1
25
7012AC
60
95
18
1.1
25
7013AC
65
100
18
1.1
25
7014AC
70
110
20
1.1
25
7015AC
75
115
20
1.1
25
7016AC
80
125
22
1.1
25
7017AC
85
130
22
1.1
25
7018AC
90
140
24
1.5
25
7019AC
95
145
24
1.5
25
7020AC
100
150
24
1.5
25
Video: DIN 628 7000AC Series Angular Contact Ball Bearings Specification
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
What is the equivalent of DIN 628?
ISO 15 internationally; GB/T 292 for single row and GB/T 296 for double row in China.
Does DIN 628 mean two bearings are interchangeable?
Dimensionally, yes — that is what a boundary dimension standard is for, and a bearing of the same designation from any maker mounts in the same shaft and housing seat. Functionally, not necessarily: the load rating, the internal design, the cage, the clearance group and the speed limit are decided by the manufacturer and by other standards, and two bearings with the same number are not required to match on any of them.
Does DIN 628 fix the load rating?
No. DIN 628 does not set load ratings. Basic dynamic load ratings are calculated to the method of ISO 281 and are declared by the manufacturer; the static rating follows ISO 76.
Which edition of DIN 628 does this table follow?
The table reproduces the dimensions we supply 7000ac series angular contact ball bearings to. We do not publish an edition year against it, so where the edition is contractually significant, cite the edition you require on the enquiry and we will confirm it against the table before quoting.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
