DIN 625 6000-2RS Series Sealed Ball Bearings Specification
What DIN 625 fixes, what it deliberately leaves to another document, its equivalents, and the dimensional table.
DIN 625 is the German standard for single and double row deep groove ball bearings. It restates the ISO 15 dimension plan for this bearing type: DIN 625-1 covers the single row 6000, 6200, 6300 and 6400 series, and the later parts the double row and thin-section variants.
Standard
DIN 625
Covers
Deep groove ball bearings
Does not fix
Like ISO 15 it fixes geometry only. The load rating is calculated to ISO 281, the tolerance class to ISO 492 / DIN 620 and the internal clearance to ISO 5753-1.
Equivalents
ISO 15 is the international parent; GB/T 276 is the Chinese equivalent for this bearing type.
Product
6000-2RS Series Sealed Ball Bearings
Governing standards
ISO 15 / DIN 625-1 / GB/T 276
Equivalence between the ISO, DIN and GB/T documents is dimensional: a bearing made to either mounts in the same seat. It is not an equivalence of load rating, tolerance class or internal clearance, each of which is fixed by a separate standard and declared separately.
For 6000-2rs series sealed ball bearings, DIN 625 is one of the controlling documents. The sections below describe its scope, the properties it does NOT decide and which standard does decide them, the equivalent designations, and the full size range.
DIN 625 — Scope
DIN 625 is the German standard for single and double row deep groove ball bearings. It restates the ISO 15 dimension plan for this bearing type: DIN 625-1 covers the single row 6000, 6200, 6300 and 6400 series, and the later parts the double row and thin-section variants.
What DIN 625 Does Not Fix
Like ISO 15 it fixes geometry only. The load rating is calculated to ISO 281, the tolerance class to ISO 492 / DIN 620 and the internal clearance to ISO 5753-1.
This division of labour is the thing to carry away from any bearing standard. A boundary dimension standard makes bearings interchangeable; it does not make them equivalent. Two bearings of the same designation from different makers mount in the same seat and are not required to have the same load rating, the same internal design, the same cage or the same speed limit.
Dimensions Supplied to DIN 625
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Seal type
Operating temperature range (u00b0C)
Basic dynamic load rating Cr (kN)
Basic static load rating C0r (kN)
6000-2RS
10
26
8
0.3
Contact rubber seal, both sides
-30 to +110
4.75
1.96
6001-2RS
12
28
8
0.3
Contact rubber seal, both sides
-30 to +110
5.4
2.36
6002-2RS
15
32
9
0.3
Contact rubber seal, both sides
-30 to +110
5.85
2.85
6003-2RS
17
35
10
0.3
Contact rubber seal, both sides
-30 to +110
6.05
3.25
6004-2RS
20
42
12
0.6
Contact rubber seal, both sides
-30 to +110
9.95
5.0
6005-2RS
25
47
12
0.6
Contact rubber seal, both sides
-30 to +110
11.9
6.55
6006-2RS
30
55
13
1
Contact rubber seal, both sides
-30 to +110
13.8
8.3
6007-2RS
35
62
14
1
Contact rubber seal, both sides
-30 to +110
16.8
10.2
6008-2RS
40
68
15
1
Contact rubber seal, both sides
-30 to +110
17.8
11.6
6009-2RS
45
75
16
1
Contact rubber seal, both sides
-30 to +110
22.1
14.6
6010-2RS
50
80
16
1
Contact rubber seal, both sides
-30 to +110
22.9
16.0
6011-2RS
55
90
18
1.1
Contact rubber seal, both sides
-30 to +110
30.7
21.2
6012-2RS
60
95
18
1.1
Contact rubber seal, both sides
-30 to +110
30.7
23.2
6013-2RS
65
100
18
1.1
Contact rubber seal, both sides
-30 to +110
32.5
25.0
6014-2RS
70
110
20
1.1
Contact rubber seal, both sides
-30 to +110
39.7
31.0
6015-2RS
75
115
20
1.1
Contact rubber seal, both sides
-30 to +110
41.6
33.5
6016-2RS
80
125
22
1.1
Contact rubber seal, both sides
-30 to +110
47.5
39.0
6017-2RS
85
130
22
1.1
Contact rubber seal, both sides
-30 to +110
49.4
41.5
6018-2RS
90
140
24
1.5
Contact rubber seal, both sides
-30 to +110
60.5
50.0
6019-2RS
95
145
24
1.5
Contact rubber seal, both sides
-30 to +110
63.7
54.0
6020-2RS
100
150
24
1.5
Contact rubber seal, both sides
-30 to +110
60.5
54.0
National Equivalents
ISO 15 is the international parent; GB/T 276 is the Chinese equivalent for this bearing type.
This product is supplied against ISO 15 / DIN 625-1 / GB/T 276, which names the documents it is made to.
Catalog Products Governed by DIN 625
DIN 625 governs more than this one series. In this catalog it applies to:
Other ways to specify the 6000-2RS Series Sealed Ball Bearings
The same part is also governed by ISO 15 and GB/T 276, and where two standards cover one dimension they agree — the numbers are the same, the document is not.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Our facility
Where these dimensions are actually made
Ring forging, heat treatment, raceway grinding and superfinishing all happen under one roof, so a bore tolerance and a clearance group are set by processes we control and can evidence, not by whichever supplier had stock.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / DIN 625-1 / GB/T 276)
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Seal type
Operating temperature range (u00b0C)
Basic dynamic load rating Cr (kN)
Basic static load rating C0r (kN)
6000-2RS
10
26
8
0.3
Contact rubber seal, both sides
-30 to +110
4.75
1.96
6001-2RS
12
28
8
0.3
Contact rubber seal, both sides
-30 to +110
5.4
2.36
6002-2RS
15
32
9
0.3
Contact rubber seal, both sides
-30 to +110
5.85
2.85
6003-2RS
17
35
10
0.3
Contact rubber seal, both sides
-30 to +110
6.05
3.25
6004-2RS
20
42
12
0.6
Contact rubber seal, both sides
-30 to +110
9.95
5.0
6005-2RS
25
47
12
0.6
Contact rubber seal, both sides
-30 to +110
11.9
6.55
6006-2RS
30
55
13
1
Contact rubber seal, both sides
-30 to +110
13.8
8.3
6007-2RS
35
62
14
1
Contact rubber seal, both sides
-30 to +110
16.8
10.2
6008-2RS
40
68
15
1
Contact rubber seal, both sides
-30 to +110
17.8
11.6
6009-2RS
45
75
16
1
Contact rubber seal, both sides
-30 to +110
22.1
14.6
6010-2RS
50
80
16
1
Contact rubber seal, both sides
-30 to +110
22.9
16.0
6011-2RS
55
90
18
1.1
Contact rubber seal, both sides
-30 to +110
30.7
21.2
6012-2RS
60
95
18
1.1
Contact rubber seal, both sides
-30 to +110
30.7
23.2
6013-2RS
65
100
18
1.1
Contact rubber seal, both sides
-30 to +110
32.5
25.0
6014-2RS
70
110
20
1.1
Contact rubber seal, both sides
-30 to +110
39.7
31.0
6015-2RS
75
115
20
1.1
Contact rubber seal, both sides
-30 to +110
41.6
33.5
6016-2RS
80
125
22
1.1
Contact rubber seal, both sides
-30 to +110
47.5
39.0
6017-2RS
85
130
22
1.1
Contact rubber seal, both sides
-30 to +110
49.4
41.5
6018-2RS
90
140
24
1.5
Contact rubber seal, both sides
-30 to +110
60.5
50.0
6019-2RS
95
145
24
1.5
Contact rubber seal, both sides
-30 to +110
63.7
54.0
6020-2RS
100
150
24
1.5
Contact rubber seal, both sides
-30 to +110
60.5
54.0
Video: DIN 625 6000-2RS Series Sealed Ball Bearings Specification
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
Does DIN 625 fix the load rating?
No. DIN 625 does not set load ratings. Basic dynamic load ratings are calculated to the method of ISO 281 and are declared by the manufacturer; the static rating follows ISO 76.
Which edition of DIN 625 does this table follow?
The table reproduces the dimensions we supply 6000-2rs series sealed ball bearings to. We do not publish an edition year against it, so where the edition is contractually significant, cite the edition you require on the enquiry and we will confirm it against the table before quoting.
Can I cite the GB/T number instead of the ISO one?
For the boundary dimensions, yes — the GB/T standards restate the ISO dimension plan and a part made to either mounts in the same seat. The safest drawing note gives both, because it stays legible if the supply moves between a Chinese, a European and an international manufacturer.
What does DIN 625 specify?
DIN 625 is the German standard for single and double row deep groove ball bearings. It restates the ISO 15 dimension plan for this bearing type: DIN 625-1 covers the single row 6000, 6200, 6300 and 6400 series, and the later parts the double row and thin-section variants.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
