Martensitic Stainless 440C UCP200 Series Pillow Block Units

Martensitic Stainless 440C UCP200 Series Pillow Block Units are dimensioned to ISO 3228 / JIS B 1559 exactly as the standard version is: the material changes the properties, never the envelope. What it does change — good in water, steam, mild chemicals and food service; it is a hardenable stainless, so it holds less chromium in solution than 304 and will stain in standing chlorides, magnetic and the service range about -30 °C to +180 °C in ordinary bearing service, the lubricant usually deciding before the steel does — is set out below with the full size chart.

Why Martensitic Stainless 440C for UCP200 Series Pillow Block Units

The standard corrosion-resistant bearing steel; a stainless bearing is rated below the same envelope in GCr15, so take its load ratings from the stainless table and never from the chrome steel one. In a ucp200 series pillow block units it is the ring and rolling element steel of the corrosion-resistant version.

It is the compromise that makes a corrosion-resistant rolling bearing possible: enough carbon to be hardened to a raceway hardness, enough chromium to resist water and mild chemicals. Everything else about the bearing — the envelope, the tolerance class, the clearance group — is unchanged.

Material Properties

Service Limits

A martensitic stainless bearing is rated below the same envelope in chrome steel and it is not stainless in the way 316 is: it is corrosion RESISTANT, and standing salt water, chlorides or long wet periods will still pit it. It is also softer at temperature than GCr15. Take the ratings from the stainless table, and where the environment is genuinely aggressive, consider a full ceramic bearing or a polymer housed unit instead.

What the Material Changes About the Bearing

The envelope is unchanged and the bearing drops into the same seat, but the load ratings are not the chrome steel ratings and must not be carried across. Expect a lower rating, a slightly lower temperature ceiling, and — in exchange — a bearing that survives the wash, the condensation or the food process that would rust a standard one.

Sizes of UCP200 Series Pillow Block Units Available in Martensitic Stainless 440C