Angular Contact Ball Bearings · ISO 15 / DIN 628-3 / GB/T 296
ISO 5753-1 3200 Series Double Row Angular Contact Ball Bearings Specification
What ISO 5753-1 fixes, what it deliberately leaves to another document, its equivalents, and the dimensional table.
ISO 5753-1 tabulates the radial internal clearance of unmounted radial bearings by bore range and clearance group — C2, CN (normal, and usually left out of the designation), C3, C4 and C5. The clearance is measured before mounting; the interference fits used on the shaft and in the housing, plus any temperature difference across the bearing, consume part of it in service.
Standard
ISO 5753-1
Covers
Radial internal clearance
Does not fix
It is not a tolerance class and it is not a fit table: how much of the listed clearance survives mounting depends on the shaft and housing fits chosen to ISO 286, which the standard does not prescribe.
Equivalents
GB/T 4604.1 is the Chinese equivalent; the values for tapered-bore and for non-ball types are given in the standard's own separate tables.
Product
3200 Series Double Row Angular Contact Ball Bearings
Governing standards
ISO 15 / DIN 628-3 / GB/T 296
Equivalence between the ISO, DIN and GB/T documents is dimensional: a bearing made to either mounts in the same seat. It is not an equivalence of load rating, tolerance class or internal clearance, each of which is fixed by a separate standard and declared separately.
For 3200 series double row angular contact ball bearings, ISO 5753-1 is one of the controlling documents. The sections below describe its scope, the properties it does NOT decide and which standard does decide them, the equivalent designations, and the full size range.
ISO 5753-1 — Scope
ISO 5753-1 tabulates the radial internal clearance of unmounted radial bearings by bore range and clearance group — C2, CN (normal, and usually left out of the designation), C3, C4 and C5. The clearance is measured before mounting; the interference fits used on the shaft and in the housing, plus any temperature difference across the bearing, consume part of it in service.
What ISO 5753-1 Does Not Fix
It is not a tolerance class and it is not a fit table: how much of the listed clearance survives mounting depends on the shaft and housing fits chosen to ISO 286, which the standard does not prescribe.
This division of labour is the thing to carry away from any bearing standard. A boundary dimension standard makes bearings interchangeable; it does not make them equivalent. Two bearings of the same designation from different makers mount in the same seat and are not required to have the same load rating, the same internal design, the same cage or the same speed limit.
Dimensions Supplied to ISO 5753-1
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Contact angle a (deg)
3200 (5200)
10
30
14.3
0.6
30
3201 (5201)
12
32
15.9
0.6
30
3202 (5202)
15
35
15.9
0.6
30
3203 (5203)
17
40
17.5
0.6
30
3204 (5204)
20
47
20.6
1
30
3205 (5205)
25
52
20.6
1
30
3206 (5206)
30
62
23.8
1
30
3207 (5207)
35
72
27
1.1
30
3208 (5208)
40
80
30.2
1.1
30
3209 (5209)
45
85
30.2
1.1
30
3210 (5210)
50
90
30.2
1.1
30
3211 (5211)
55
100
33.3
1.5
30
3212 (5212)
60
110
36.5
1.5
30
3213 (5213)
65
120
38.1
1.5
30
3214 (5214)
70
125
39.7
1.5
30
3215 (5215)
75
130
41.3
1.5
30
3216 (5216)
80
140
44.4
2
30
3217 (5217)
85
150
49.2
2
30
3218 (5218)
90
160
52.4
2
30
3219 (5219)
95
170
55.6
2.1
30
3220 (5220)
100
180
60.3
2.1
30
National Equivalents
GB/T 4604.1 is the Chinese equivalent; the values for tapered-bore and for non-ball types are given in the standard's own separate tables.
This product is supplied against ISO 15 / DIN 628-3 / GB/T 296, which names the documents it is made to.
Catalog Products Governed by ISO 5753-1
ISO 5753-1 governs more than this one series. In this catalog it applies to:
Other ways to specify the 3200 Series Double Row Angular Contact Ball Bearings
The same part is also governed by ISO 15 and DIN 628, and where two standards cover one dimension they agree — the numbers are the same, the document is not.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Our facility
The numbers come off our own machines
Every ring is gauged for bore and outside diameter, every assembly for radial internal clearance to ISO 5753-1, and every finished bearing for vibration. That is why the values on this page are quotable rather than indicative.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / DIN 628-3 / GB/T 296)
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Contact angle a (deg)
3200 (5200)
10
30
14.3
0.6
30
3201 (5201)
12
32
15.9
0.6
30
3202 (5202)
15
35
15.9
0.6
30
3203 (5203)
17
40
17.5
0.6
30
3204 (5204)
20
47
20.6
1
30
3205 (5205)
25
52
20.6
1
30
3206 (5206)
30
62
23.8
1
30
3207 (5207)
35
72
27
1.1
30
3208 (5208)
40
80
30.2
1.1
30
3209 (5209)
45
85
30.2
1.1
30
3210 (5210)
50
90
30.2
1.1
30
3211 (5211)
55
100
33.3
1.5
30
3212 (5212)
60
110
36.5
1.5
30
3213 (5213)
65
120
38.1
1.5
30
3214 (5214)
70
125
39.7
1.5
30
3215 (5215)
75
130
41.3
1.5
30
3216 (5216)
80
140
44.4
2
30
3217 (5217)
85
150
49.2
2
30
3218 (5218)
90
160
52.4
2
30
3219 (5219)
95
170
55.6
2.1
30
3220 (5220)
100
180
60.3
2.1
30
Video: ISO 5753-1 3200 Series Double Row Angular Contact Ball Bearings Specification
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
Which edition of ISO 5753-1 does this table follow?
The table reproduces the dimensions we supply 3200 series double row angular contact ball bearings to. We do not publish an edition year against it, so where the edition is contractually significant, cite the edition you require on the enquiry and we will confirm it against the table before quoting.
Can I cite the GB/T number instead of the ISO one?
For the boundary dimensions, yes — the GB/T standards restate the ISO dimension plan and a part made to either mounts in the same seat. The safest drawing note gives both, because it stays legible if the supply moves between a Chinese, a European and an international manufacturer.
What does ISO 5753-1 specify?
ISO 5753-1 tabulates the radial internal clearance of unmounted radial bearings by bore range and clearance group — C2, CN (normal, and usually left out of the designation), C3, C4 and C5. The clearance is measured before mounting; the interference fits used on the shaft and in the housing, plus any temperature difference across the bearing, consume part of it in service.
What does ISO 5753-1 not cover?
It is not a tolerance class and it is not a fit table: how much of the listed clearance survives mounting depends on the shaft and housing fits chosen to ISO 286, which the standard does not prescribe.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
