ISO 15 6800 Series Thin Section Ball Bearings Specification
What ISO 15 fixes, what it deliberately leaves to another document, its equivalents, and the dimensional table.
ISO 15 fixes the boundary dimensions of metric radial rolling bearings: the bore d, the outside diameter D, the width B and the limiting corner radius r, arranged in diameter and width series so that a bore of 20 mm exists in several standard envelopes (6004, 6204, 6304, 6404). It is the reason a 6204 from any manufacturer drops into the same housing.
Standard
ISO 15
Covers
Boundary dimensions of radial rolling bearings
Does not fix
It says nothing about how much load the bearing carries, how fast it may run, how accurately it is made or how much clearance it has. Load ratings are calculated to ISO 281, running accuracy is ISO 492 and radial internal clearance is ISO 5753-1.
Equivalents
DIN 616 restates the dimension plan nationally, with the individual bearing types in DIN 625, DIN 628, DIN 630, DIN 635 and DIN 5412; GB/T 273.3 carries the same plan in China.
Product
6800 Series Thin Section Ball Bearings
Governing standards
ISO 15 / DIN 625-1 / GB/T 276
Equivalence between the ISO, DIN and GB/T documents is dimensional: a bearing made to either mounts in the same seat. It is not an equivalence of load rating, tolerance class or internal clearance, each of which is fixed by a separate standard and declared separately.
6800 Series Thin Section Ball Bearings manufactured to ISO 15 are tabulated below. The standard covers boundary dimensions of radial rolling bearings — and reading it as though it covered anything else is the most common mistake made with a bearing standard, so the boundary of its scope is set out first.
ISO 15 — Scope
ISO 15 fixes the boundary dimensions of metric radial rolling bearings: the bore d, the outside diameter D, the width B and the limiting corner radius r, arranged in diameter and width series so that a bore of 20 mm exists in several standard envelopes (6004, 6204, 6304, 6404). It is the reason a 6204 from any manufacturer drops into the same housing.
What ISO 15 Does Not Fix
It says nothing about how much load the bearing carries, how fast it may run, how accurately it is made or how much clearance it has. Load ratings are calculated to ISO 281, running accuracy is ISO 492 and radial internal clearance is ISO 5753-1.
This division of labour is the thing to carry away from any bearing standard. A boundary dimension standard makes bearings interchangeable; it does not make them equivalent. Two bearings of the same designation from different makers mount in the same seat and are not required to have the same load rating, the same internal design, the same cage or the same speed limit.
Dimensions Supplied to ISO 15
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Basic dynamic load rating Cr (kN)
Basic static load rating C0r (kN)
Limiting speed grease (rpm)
Mass (kg)
6800
10
19
5
0.3
1.74
0.865
22000
0.0053
6801
12
21
5
0.3
1.92
1.04
20000
0.0060
6802
15
24
5
0.3
2.08
1.27
17000
0.0071
6803
17
26
5
0.3
2.21
1.46
15000
0.0077
6804
20
32
7
0.3
4.03
2.60
13000
0.019
6805
25
37
7
0.3
4.36
3.10
11000
0.022
6806
30
42
7
0.3
4.49
3.45
9500
0.026
6807
35
47
7
0.3
4.62
3.75
8500
0.029
6808
40
52
7
0.3
4.94
4.30
7500
0.033
6809
45
58
7
0.3
6.63
6.10
6700
0.038
6810
50
65
7
0.3
6.76
6.55
6300
0.049
6811
55
72
9
0.3
9.56
9.50
5600
0.075
6812
60
78
10
0.3
11.9
11.4
5300
0.096
6813
65
85
10
0.6
12.4
12.7
5000
0.110
6814
70
90
10
0.6
12.7
13.7
4500
0.120
6815
75
95
10
0.6
13.0
14.6
4300
0.125
6816
80
100
10
0.6
13.3
15.6
4000
0.135
6817
85
110
13
1
19.5
22.4
3800
0.250
6818
90
115
13
1
19.9
23.6
3600
0.265
6819
95
120
13
1
20.3
24.5
3400
0.275
6820
100
125
13
1
20.8
26.0
3200
0.290
Catalog Products Governed by ISO 15
ISO 15 governs more than this one series. In this catalog it applies to:
ISO 15 is the international reference and the right one to cite on a new drawing or a purchase specification. Adding the national equivalents alongside it costs nothing and makes the requirement legible to a supplier working to DIN or to GB/T.
Other ways to specify the 6800 Series Thin Section Ball Bearings
The same part is also governed by ISO 281 and ISO 5753-1, and where two standards cover one dimension they agree — the numbers are the same, the document is not.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Our facility
The numbers come off our own machines
Every ring is gauged for bore and outside diameter, every assembly for radial internal clearance to ISO 5753-1, and every finished bearing for vibration. That is why the values on this page are quotable rather than indicative.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / DIN 625-1 / GB/T 276)
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Basic dynamic load rating Cr (kN)
Basic static load rating C0r (kN)
Limiting speed grease (rpm)
Mass (kg)
6800
10
19
5
0.3
1.74
0.865
22000
0.0053
6801
12
21
5
0.3
1.92
1.04
20000
0.0060
6802
15
24
5
0.3
2.08
1.27
17000
0.0071
6803
17
26
5
0.3
2.21
1.46
15000
0.0077
6804
20
32
7
0.3
4.03
2.60
13000
0.019
6805
25
37
7
0.3
4.36
3.10
11000
0.022
6806
30
42
7
0.3
4.49
3.45
9500
0.026
6807
35
47
7
0.3
4.62
3.75
8500
0.029
6808
40
52
7
0.3
4.94
4.30
7500
0.033
6809
45
58
7
0.3
6.63
6.10
6700
0.038
6810
50
65
7
0.3
6.76
6.55
6300
0.049
6811
55
72
9
0.3
9.56
9.50
5600
0.075
6812
60
78
10
0.3
11.9
11.4
5300
0.096
6813
65
85
10
0.6
12.4
12.7
5000
0.110
6814
70
90
10
0.6
12.7
13.7
4500
0.120
6815
75
95
10
0.6
13.0
14.6
4300
0.125
6816
80
100
10
0.6
13.3
15.6
4000
0.135
6817
85
110
13
1
19.5
22.4
3800
0.250
6818
90
115
13
1
19.9
23.6
3600
0.265
6819
95
120
13
1
20.3
24.5
3400
0.275
6820
100
125
13
1
20.8
26.0
3200
0.290
Video: ISO 15 6800 Series Thin Section Ball Bearings Specification
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
What does ISO 15 not cover?
It says nothing about how much load the bearing carries, how fast it may run, how accurately it is made or how much clearance it has. Load ratings are calculated to ISO 281, running accuracy is ISO 492 and radial internal clearance is ISO 5753-1.
What is the equivalent of ISO 15?
DIN 616 restates the dimension plan nationally, with the individual bearing types in DIN 625, DIN 628, DIN 630, DIN 635 and DIN 5412; GB/T 273.3 carries the same plan in China.
Does ISO 15 mean two bearings are interchangeable?
Dimensionally, yes — that is what a boundary dimension standard is for, and a bearing of the same designation from any maker mounts in the same shaft and housing seat. Functionally, not necessarily: the load rating, the internal design, the cage, the clearance group and the speed limit are decided by the manufacturer and by other standards, and two bearings with the same number are not required to match on any of them.
Does ISO 15 fix the load rating?
No. ISO 15 does not set load ratings. Basic dynamic load ratings are calculated to the method of ISO 281 and are declared by the manufacturer; the static rating follows ISO 76.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
