Cylindrical Roller Bearings · NUP / NF Type (Two-Direction Location)
NUP200 Series Cylindrical Roller Bearings
19 catalogued sizes, dimensioned to ISO 15 / DIN 5412-1 / GB/T 283. Pick any row and the technical drawing redraws to it.
NUP200 Series Cylindrical Roller Bearings to ISO 15 / DIN 5412-1 / GB/T 283 are catalogued in bore 20-110 mm, with od 47-200 mm, wide 14-38 mm, r 1-2.1 mm. 19 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
ISO 15 / DIN 5412-1 / GB/T 283
Bore
20-110 mm
OD
47-200 mm
Wide
14-38 mm
Catalogued sizes
19
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Technical Drawing
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the designation snaps the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for NUP200 Series Cylindrical Roller Bearings
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 15 / DIN 5412-1 / GB/T 283)
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Designation
Bore d (mm)
Outer diameter D (mm)
Width B (mm)
Chamfer r min (mm)
Rib arrangement
NUP204
20
47
14
1
Locates shaft in both directions
NUP205
25
52
15
1
Locates shaft in both directions
NUP206
30
62
16
1
Locates shaft in both directions
NUP207
35
72
17
1.1
Locates shaft in both directions
NUP208
40
80
18
1.1
Locates shaft in both directions
NUP209
45
85
19
1.1
Locates shaft in both directions
NUP210
50
90
20
1.1
Locates shaft in both directions
NUP211
55
100
21
1.5
Locates shaft in both directions
NUP212
60
110
22
1.5
Locates shaft in both directions
NUP213
65
120
23
1.5
Locates shaft in both directions
NUP214
70
125
24
1.5
Locates shaft in both directions
NUP215
75
130
25
1.5
Locates shaft in both directions
NUP216
80
140
26
2
Locates shaft in both directions
NUP217
85
150
28
2
Locates shaft in both directions
NUP218
90
160
30
2
Locates shaft in both directions
NUP219
95
170
32
2.1
Locates shaft in both directions
NUP220
100
180
34
2.1
Locates shaft in both directions
NUP221
105
190
36
2.1
Locates shaft in both directions
NUP222
110
200
38
2.1
Locates shaft in both directions
Manufactured to ISO 15 / DIN 5412-1 / GB/T 283, NUP200 Series Cylindrical Roller Bearings are cylindrical roller bearings supplied by Bushing Bearings. Every designation in the series is listed with its boundary dimensions; the interactive half-section drawing redraws itself for whichever size you select.
What Are NUP200 Series Cylindrical Roller Bearings?
NUP200 Series Cylindrical Roller Bearings are cylindrical roller bearings defined by ISO 15 / DIN 5412-1 / GB/T 283. They are selected by bearing designation and the dimensional characteristics shown below. Material, cage and sealing are specified separately from the designation and are covered further down this page.
Materials & Cage
Rings and rollers are through-hardened GCr15 / 100Cr6, or case-hardened 20CrMnTi / SAE 8620 in the larger sections and under shock load, where a hard case over a tough core resists raceway spalling better than a through-hardened section. Cages are pressed steel, machined brass or polyamide; a full-complement bearing has no cage at all, which raises the load rating and lowers the speed limit.
NUP200 Series Cylindrical Roller Bearings are supplied to order. Pricing starts from approximately US$5.10 per piece for standard bore sizes in bearing steel with a pressed steel or polyamide cage; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Specifying the NUP200 Series Cylindrical Roller Bearings
Most enquiries start from a shaft diameter rather than from a designation. The bore pages take one size at a time — 65 mm bore, 70 mm bore, 75 mm bore and 80 mm bore — and carry the boundary dimensions for that bore together with the shaft and housing tolerances that go with it.
Where the environment decides the specification rather than the load, the material pages are the ones to read: Case-Hardened 20CrMnTi, Pressed Steel Cage and Polyamide Cage. Each states what the grade survives, and what choosing it costs in load capacity or temperature range.
The dimensions above are fixed by ISO 15 and ISO 5753-1 — that is what makes one maker's bearing interchangeable with another's, and it is worth checking which standard a quotation is written to. For the machines and duties this type is actually specified for, see where nup200 series cylindrical roller bearings are fitted.
Inside the plant
Manufactured in our own plant
This bearing is forged, hardened, ground, superfinished and clearance-set in-house. The stages below are where its tolerance class, its internal clearance and its noise grade are actually decided.
01
Forging & turning
GCr15 bar and tube is cut, heated and forged into ring blanks, then turned to leave a uniform grinding allowance. Forging rather than machining from solid keeps the grain flow following the raceway, which is the surface that eventually fails.
Blank dimensions and grinding stock checked at set-up and per shift.
02
Heat treatment
Through-hardening brings GCr15 / 100Cr6 to 58–64 HRC; carburizing case-hardens 20CrMnTi where the section is heavy or the load is shock. Rings are then stabilized so they hold size in service rather than growing in the housing.
Core and surface hardness per lot; retained austenite and dimensional stability to the ordered temperature class.
03
Raceway grinding
Faces, bore, outer diameter and raceway are ground in sequence on separate machines. This is where the tolerance class is created: P0, P6, P5 or P4 is a grinding outcome, not a sorting outcome.
Bore and outer diameter deviation, raceway roundness and face runout measured to ISO 492 on every setup.
04
Honing & superfinishing
The ground raceway is honed to remove the grinding lay and bring surface roughness down to a fraction of a micrometre. Raceway finish is what decides whether a lubricant film forms, and therefore what decides bearing life far more than the load rating alone.
Surface roughness Ra and waviness measured per lot.
Video: NUP200 Series Cylindrical Roller Bearings
Third-party video, selected automatically for this topic. It is not produced by Bushing Bearings and is not a specification source — use the tables on this page for dimensional data.
Frequently Asked Questions
Which standard applies to NUP200 Series Cylindrical Roller Bearings, and how are they located on the shaft?
NUP200 Series Cylindrical Roller Bearings are manufactured to ISO 15 / DIN 5412-1 / GB/T 283, which fixes the boundary dimensions on this page. They are mounted with an interference fit on the shaft and a transition or clearance fit in the housing, chosen from the load case and which ring rotates.
Which sizes of NUP200 Series Cylindrical Roller Bearings does Bushing Bearings supply?
The table on this page lists 19 sizes for NUP200 Series Cylindrical Roller Bearings, ranging from NUP204 to NUP222. Sizes outside the table can be quoted on request.
In which materials are NUP200 Series Cylindrical Roller Bearings supplied?
NUP200 Series Cylindrical Roller Bearings are supplied in through-hardened GCr15 / 100Cr6, or case-hardened 20CrMnTi / SAE 8620 in the larger sections and under shock load. Material is only part of the specification: state the internal clearance group (or preload class), the seal or shield type and the cage material alongside the designation, because all three change the part you receive.
What shaft and housing tolerances suit NUP200 Series Cylindrical Roller Bearings?
The smallest bore on this page is 20 mm. With a rotating inner ring under normal load the shaft is normally machined to k5 or m6 and the housing to H7 or J7, so the inner ring is an interference fit and the outer ring can move axially to take up thermal growth. Reverse the fits when it is the outer ring that rotates. Check the figure against your own load case before machining.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration — designation, internal clearance, seal type and cage — and click "Request this configuration". A specialist from Bushing Bearings will respond within one business day.
Need a bearing quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
